HDD 3.5″ 10TB Seagate IronWolf NAS SATA3 7200RPM 256MB ST10000VN000

Specifications
– Capacity: 10TB
– Standard Model Number: ST10000VN000
– Interface: SATA 6Gb/s
Features and Performance
– Drive Bays Supported: 1 – 8 Bays
– Recording Technology: CMR
– Drive Design (Air or Helium): Air
– Workload Rate Limit (WRL): 180
– Rotational Vibration (RV) Sensor: Yes
– Dual-Plane Balance: Yes
– Error Recovery Control: Yes
– Max. Sustained Transfer Rate OD (MB/s): 210MB/s
– Spindle Speed (RPM): 7,200
– Cache (MB): 256
Reliability
– Load/Unload Cycles: 600,000
– Non-recoverable Read Errors Rate, Max: 1 per 10E15
– Power-on Hours: 8,760
– Mean Time Between Failures (MTBF, hours): 1,000,000
Power Management
– Startup Current, Typical (12V, A): 1.8
– Average Operating Power: 10.1
– Idle Power Average (W): 7.8 W
– Standby Mode/Sleep Mode, Typical (W): 1/1
– Voltage Tolerance, Inc. Noise (5V / 12V): ±5% / ±10%
Environmental/Temperature
– Operating Temperature (ambient, min °C): 0
– Operating Temperature (drive reported, max °C): 65
– Nonoperating Temperature (ambient, min / max °C): -40 / 70
Environmental/Shock
– Shock, Operating/Non-operating: 2 ms (max): 70 Gs/300 Gs
Environmental/Acoustics
– Acoustics, Idle (typical, measured in Idle 1 state) (dBA): 28
– Acoustics, Seek (typical) (dBA): 32
Physical
– Height (mm/in): 26.11 mm/1.028 in
– Width (mm/in, max): 101.85 mm/4.01 in
– Depth (mm/in, max): 146.99 mm/5.787 in
– Weight (g/lb, typical): 720 g/1.59 lb