MB Gigabyte B450M K AM4 DDR4 3600MHz OC SATA3 M.2 USB3.2 HDMI

Specifications
– CPU: AMD Socket AM4, support for: AMD Ryzen™ 5000 Series Processors/ AMD Ryzen™ 5000 G-Series Processors/ AMD Ryzen™ 4000 G-Series Processors/ 3rd Generation AMD Ryzen™ processors/ 2nd Generation AMD Ryzen™ processors/ 1st Generation AMD Ryzen™ processors/ 2nd Generation Ryzen™ with Radeon™ Vega Graphics processors/ 1st Generation Ryzen™ with Radeon™ Vega Graphics processors/ Athlon™ with Radeon™ Vega Graphics Processors
– Chipset: AMD B450
– Memory: Support for DDR4 3600(O.C.)/3466(O.C.)/2933/2667/2400/2133 MHz memory modules
– 2 x DDR4 DIMM sockets supporting up to 64 GB (32 GB single DIMM capacity) of system memory
– Dual channel memory architecture
– Support for ECC Un-buffered DIMM 1Rx8/2Rx8 memory modules (operate in non-ECC mode)
– Support for non-ECC Un-buffered DIMM 1Rx8/2Rx8/1Rx16 memory modules
– Support for Extreme Memory Profile (XMP) memory modules
Onboard Graphics
Integrated Graphics Processor
– 1 x HDMI port, supporting a maximum resolution of 4096×2160@60 Hz
– *Support for HDMI 2.0 version and HDCP 2.2.
– Maximum shared memory of 16 GB
Audio
– Realtek® Audio CODEC
– High Definition Audio
– 2/4/5.1/7.1-channel
– LAN: Realtek® GbE LAN chip (1 Gbps/ 100 Mbps)
Expansion Slots
– CPU: 1 x PCI Express x16 slot, supporting PCIe 3.0 and running at x16*
– * Actual support may vary by CPU.
– Chipset: 1 x PCI Express x1 slot, supporting PCIe 2.0 and running at x1
– Storage Interface 1 x M.2 connector (Socket 3, M key, type 22110/2280/2260/2242 SATA and PCIe 3.0 x4/x2(Note) SSD support)
– * Refer to “2-7 Internal Connectors,” for the installation notices for the M.2 connector.
– 4 x SATA 6Gb/s connectors
– RAID 0, RAID 1, and RAID 10 support for NVMe SSD storage devices
– RAID 0, RAID 1, and RAID 10 support for SATA storage devices
– (Note) Supports only M.2 SATA SSDs when using an Athlon™ with Radeon™ Vega Graphics Processors.
USB
– Chipset: 2 x USB 3.2 Gen 1 ports available through the internal USB header
– 6 x USB 2.0/1.1 ports (2 ports on the back panel, 4 ports available through the internal USB headers)
– CPU: 4 x USB 3.2 Gen 1 ports on the back panel
Internal I/O Connectors
– 1 x CPU fan header
– 1 x system fan header
– 1 x M.2 Socket 3 connector
– 4 x SATA 6Gb/s connectors
– 1 x Trusted Platform Module (TPM) header (2×6 pin, for the GC-TPM2.0_S module only)
Back Panel Connectors
– 1 x PS/2 keyboard port
– 1 x PS/2 mouse port
– 1 x HDMI 2.0 port
– 4 x USB 3.2 Gen 1 ports
– 2 x USB 2.0/1.1 ports
– 1 x RJ-45 port
– 3 x audio jacks
– I/O Controller: iTE® I/O Controller Chip
– Operating System: Windows 11 64-bit, Windows 10 64-bit, Windows 7 64-bit
– Form Factor: Micro ATX Form Factor; 24.4cm x 19.5cm