DIMM 16GB DDR4 2666MHz Kingston CL19


SKU: DIMM 16GB DDR4 2666MHz Kingston CL19 , ,

Опис на производот

– This document describes ValueRAM’s KVR26N19D8/16 is a 2G x 64-bit (16GB) DDR4-2666 CL19 SDRAM (Synchronous DRAM), 2Rx8, memory module, based on sixteen 1G x 8-bit FBGA components. The SPD is programmed to JEDEC standard latency DDR4-2666 timing of 19-19-19 at 1.2V. Each 288-pin DIMM uses gold contact fingers. The electrical and mechanical specifications are as follows:
– Power Supply: VDD=1.2V Typical
– VDDQ = 1.2V Typical
– VPP – 2.5V Typical
– VDDSPD=2.2V to 3.6V
– Nominal and dynamic on-die termination (ODT) for data, strobe, and mask signals
– Low-power auto self refresh (LPASR)
– Data bus inversion (DBI) for data bus
– On-die VREFDQ generation and calibration
– Dual-rank
– On-board I2 serial presence-detect (SPD) EEPROM
– 16 Internal banks; 4 groups of 4 banks each
– Fixed burst chop (BC) of 4 and burst length (BL) of 8 via the mode register set (MRS)
– Selectable BC4 or BL8 on-the-fly (OTF)
– Fly-by topology
– Terminated control command and address bus
– PCB: Height 1.23” (31.25mm)
– RoHS Compliant and Halogen-Free
– CL (IDD): 19 Cycles
– Row Cycle Time (tRCmin): 45.75ns (min)
– Refresh to Active/Refresh
– Command Time (tRFCmin): 350ns (min)
– Row Active Time (tRASmin): 32ns (min)
– Maximum Operating Power: TBD W*
– UL Rating: 94V – 0
– Operating Temperature: oC to +85oC
– Storage Temperature: -55oC to +100oC


There are no reviews yet.

Be the first to review “DIMM 16GB DDR4 2666MHz Kingston CL19”

Вашата адреса за е-пошта нема да биде објавена. Задолжителните полиња се означени со *