DIMM 8GB DDR4 3000MHz Kingston HyperX Fury Black CL15 RGB


SKU: DIMM 8GB DDR4 3000MHz Kingston HyperX Fury Black CL15 RGB , ,

Опис на производот

– HyperX HX430C15FB3A/8 is a 1G x 64-bit (8GB) DDR4-3000 CL15 SDRAM (Synchronous DRAM) 1Rx8, memory module, based on eight 1G x 8-bit FBGA components per module. Each module kit supports Intel® Extreme Memory Profiles (Intel® XMP) 2.0. Each module has been tested to run at DDR4-3000 at a low latency timing of 15-17-17 at 1.35V. The SPDs are programmed to JEDEC standard latency DDR4-2400 timing of 17-17-17 at 1.2V. Each 288-pin DIMM uses gold contact fingers. The JEDEC standard electrical and mechanical specifications are as follows:
XMP Timing parameters
– Default (JEDEC): DDR4-2400 CL17-17-17 @1.2V
– XMP Profile #1: DDR4-3000 CL15-17-17 @1.35V
– XMP Profile #2: DDR4-2666 CL15-17-17 @1.35V
– CL (IDD): 17 cycles
– Row Cycle Time (tRCmin): 45.75ns (min)
– Refresh to Active/Refresh: 350ns (min)
– Command Time (tRFCmin)
– Row Active Time (tRASmin): 32ns (min)
– UL Rating: 94V – 0
– Operating Temperature: 0oC to +70oC
– Storage Temperature: -40oC to +85oC
– Power Supply: VDD = 1.2V Typical
– VDDQ = 1.2V Typical
– VPP = 2.5V Typical
– VDDSPD = 2.2V to 3.6V
– On-Die termination (ODT)
– 16 Internal banks; 4 groups of 4 banks each
– Bi-Directional Differential Data Strobe
– 8 Bit pre-fetch
– Burst Length (BL) switch on-the-fly BL8 or BC4(Burst Chop)
– Height 1.624” (41.24mm), w/heatsink


There are no reviews yet.

Be the first to review “DIMM 8GB DDR4 3000MHz Kingston HyperX Fury Black CL15 RGB”

Вашата адреса за е-пошта нема да биде објавена. Задолжителните полиња се означени со *