DIMM 16GB DDR4 2666MHz Kingston Fury Beast CL16

DESCRIPTION
– FURY KF426C16BB/16 is a 2G x 64-bit (16GB) DDR4-2666 CL16 SDRAM (Synchronous DRAM) 1Rx8, memory module, based on eight 2G x 8-bit FBGA components per module. Each module kit supports Intel® Extreme Memory Profiles (Intel® XMP) 2.0. Each module has been tested to run at DDR4-2666 at a low latency timing of 16-18-18 at 1.2V. Additional timing parameters are shown in the Plug-N-Play (PnP) Timing Parameters section below. Each 288-pin DIMM uses gold contact fingers. The JEDEC standard electrical and mechanical specifications are as follows:
FACTORY TIMING PARAMETERS
– Default (Plug N Play): DDR4-2666 CL16-18-18 @ 1.2V
– XMP Profile #1: DDR4-2666 CL16-18-18 @ 1.2V
SPECIFICATIONS
– CL (IDD): 16 cycles
– Row Cycle Time (tRCmin): 45.75ns(min.)
– Refresh to Active/Refresh Command Time (tRFCmin): 260ns(min.)
– Row Active Time (tRASmin): 29.25ns(min.)
– UL Rating: 94 V – 0
– Operating Temperature: 0°C to +85°C
– Storage Temperature: -55°C to +100°C
FEATURES
– Power Supply: VDD = 1.2V Typical
– VDDQ = 1.2V Typical
– VPP = 2.5V Typical
– VDDSPD = 2.2V to 3.6V
– On-Die termination (ODT)
– 16 internal banks; 4 groups of 4 banks each
– Bi-Directional Differential Data Strobe
– 8 bit pre-fetch
– Burst Length (BL) switch on-the-fly BL8 or BC4(Burst Chop)
– Height 1.34” (34mm), w/heatsink