DIMM 8GB DDR4 3200MHz Kingston CL22 1Rx16

DESCRIPTION
– This document describes ValueRAM’s KVR32N22S6/8 is a 1G x 64-bit (8GB) DDR4-3200 CL22 SDRAM (Synchronous DRAM), 1Rx16, memory module, based on four 1G x 16-bit FBGA components. The SPD is programmed to JEDEC standard latency DDR4-3200 timing of 22-22-22 at 1.2V. Each 288-pin DIMM uses gold contact fingers. The electrical and mechanical specifications are as follows:
SPECIFICATIONS
– CL(IDD) – 22 cycles
– Row Cycle Time (tRCmin) – 45.75ns(min.)
– Refresh to Active/Refresh Command Time (tRFCmin) – 350ns(min.)
– Row Active Time (tRASmin) – 32ns(min.)
– UL Rating – 94 V – 0
– Operating Temperature – 0° C to +85° C
– Storage Temperature – -55° C to +100° C
FEATURES
– Power Supply: VDD = 1.2V Typical
– VDDQ = 1.2V Typical
– VPP = 2.5V Typical
– VDDSPD = 2.2V to 3.6V
– Nominal and dynamic on-die termination (ODT) for data, strobe, and mask signals
– Low-power auto self refresh (LPASR)
– Data bus inversion (DBI) for data bus
– On-die VREFDQ generation and calibration
– Single-rank
– On-board I2 serial presence-detect (SPD) EEPROM
– 8 internal banks; 2 groups of 4 banks each
– Fixed burst chop (BC) of 4 and burst length (BL) of 8 via the mode register set (MRS)
– Selectable BC4 or BL8 on-the-fly (OTF)
– Fly-by topology
– Terminated control command and address bus
– PCB: Height 1.23” (31.25mm)
– RoHS Compliant and Halogen-Free