MB Gigabyte X670E AORUS PRO X AM5 DDR5 8000MHz OC SATA3/4xM.2/Type-C/WiFi7/BT5.3/2.5Gb/PCIe5.0/HDMI

Specifications
CPU
– AMD Socket AM5, support for: AMD Ryzen™ 7000 / Ryzen™ 8000 Series Processors
– Chipset: AMD X670
– Memory: Support for DDR5 8000(OC)/ 7800(OC)/ 7600(OC)/ 7200(OC)/ 7000(OC)/ 6800(OC)/ 6666(OC)/ 6600(OC)/ 6400(OC)/ 6200(OC)/ 6000(OC)/ 5600(OC)/ 5200/ 4800/ 4400 MT/s memory modules
– 4 x DDR5 DIMM sockets supporting up to 192 GB (48 GB single DIMM capacity) of system memory
– Dual channel memory architecture
Onboard Graphics: Integrated Graphics Processor with AMD Radeon™ Graphics support
– 1 x HDMI port, supporting a maximum resolution of 4096×2160@60 Hz
– 1 x Front HDMI port, supporting a maximum resolution of 1920×1080@30 Hz
Audio
– Realtek® Audio CODEC
– High Definition Audio
– 2/4/5.1/7.1-channel
– LAN: Intel® 2.5GbE LAN chip (2.5 Gbps/1 Gbps/100 Mbps)
Wireless Communication module
Qualcomm® Wi-Fi 7 QCNCM865 (PCB rev. 1.0)
– 802.11a, b, g, n, ac, ax, be, supporting 2.4/5/6 GHz carrier frequency bands
– BLUETOOTH 5.3
– Support for 11be 320MHz wireless standard
MediaTek Wi-Fi 7 MT7927, RZ738 (PCB rev. 1.1)
– 802.11a, b, g, n, ac, ax, be, supporting 2.4/5/6 GHz carrier frequency bands
– BLUETOOTH 5.3
– Support for 11be 320MHz wireless standard
Expansion Slots
– CPU: – 1 x PCI Express x16 slot, supporting PCIe 5.0 (Note) and running at x16 (PCIEX16)
– Chipset: – 1 x PCI Express x16 slot, supporting PCIe 3.0 and running at x4 (PCIEX4)
– 1 x PCI Express x16 slot, supporting PCIe 3.0 and running at x2 (PCIEX2)
Storage Interface
– CPU: – 1 x M.2 connector (Socket 3, M key, type 25110/2280 PCIe 5.0 (Note) x4/x2 SSD support) (M2A_CPU)
– 1 x M.2 connector (Socket 3, M key, type 22110/2280 PCIe 5.0 (Note) x4/x2 SSD support) (M2B_CPU)
Chipset
– 2 x M.2 connectors (Socket 3, M key, type 22110/2280 PCIe 4.0 x4/x2 SSD support)(M2C_SB, M2D_SB)
– 4 x SATA 6Gb/s connectors
– RAID 0, RAID 1, and RAID 10 support for NVMe SSD storage devices
– RAID 0, RAID 1, and RAID 10 support for SATA storage devices
USB
– CPU: – 1 x USB 3.2 Gen 2 Type-A port (red) on the back panel
– 2 x USB 3.2 Gen 1 ports on the back panel
– CPU + USB 2.0 Hub:
– 4 x USB 2.0/1.1 ports on the back panel
– Chipset: – 2 x USB Type-C® ports, with USB 3.2 Gen 2×2 support (1 port on the back panel, 1 port available through the internal USB header)
– 2 x USB 3.2 Gen 2 Type-A ports (red) on the back panel
– 6 x USB 3.2 Gen 1 ports (2 ports on the back panel, 4 ports available through the internal USB headers)
– 4 x USB 2.0/1.1 ports available through the internal USB headers
Internal I/O Connectors
– 1 x 24-pin ATX main power connector
– 2 x 8-pin ATX 12V power connectors
– 1 x CPU fan header
– 1 x CPU fan/water cooling pump header
– 4 x system fan headers
– 2 x system fan/water cooling pump headers
– 3 x addressable RGB Gen2 LED strip headers
– 1 x RGB LED strip header
– 4 x SATA 6Gb/s connectors
– 4 x M.2 Socket 3 connectors
– 2 x temperature sensor headers
– 1 x front panel header
– 1 x front panel audio header
– 1 x USB Type-C® header, with USB 3.2 Gen 2×2 support
– 2 x USB 3.2 Gen 1 headers
– 2 x USB 2.0/1.1 headers
– 1 x noise detection header
– 1 x THB_U4 add-in card connector
– 1 x HDMI port
– 1 x Trusted Platform Module header (For the GC-TPM2.0 SPI/GC-TPM2.0 SPI 2.0/GC-TPM2.0 SPI V2 module only)
– 1 x power button
– 1 x reset button
– 1 x Clear CMOS button
– 1 x reset jumper
– 1 x Clear CMOS jumper
Back Panel Connectors
– 1 x Q-Flash Plus button
– 2 x SMA antenna connectors (2T2R)
– 1 x HDMI port
– 4 x USB 3.2 Gen 1 ports
– 4 x USB 2.0/1.1 ports
– 3 x USB 3.2 Gen 2 Type-A ports (red)
– 1 x USB Type-C® port, with USB 3.2 Gen 2×2 support
– 1 x RJ-45 port
– 3 x audio jacks
– I/O Controller: iTE® I/O Controller Chip
– Operating system: Support for Windows 11 64-bit
– Form Factor: ATX Form Factor; 30.5cm x 24.4cm